PHOTOELECTRIC SWITCH

The photoelectric switch JL-101 is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
Category : Photo Controller
*JL-101A **09 ***/ L N
*: Model Number;
**: Lead Length (in inches);
***: Other Options:
L = Couple metal lock-nuts (Null = One metal lock-nut offered);
N = Neoprene O-ring gasket for outdoor use. (Null = One gasket offered)
image/ft4vrg7wQSe7MtoXg4ozjg
Product Summary

The photoelectric switch JL-101 is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.


Installation

Disconnect power, remove junction box cover, place the SWITCH in knockout hole and fasten with locknut. 

Wire according to the diagram in right hand.

Do not install the switch with the Photocell facing artificial or reflected light. This will cause the unit to cycle on and off at night. 


Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes.


Tel:+86-591-87533017, 88000103,
88000107, 88000113, 88000115

3/F NO. 91 Taiyu Rd, Fuwan Pian,
Jinshan Industrial zone, Fuzhou,PRC 350008

Follow us

Copyright © Bonle (Fuzhou) International Co., Ltd.  All Rights Reserved  Powered by www.300.cn  闽ICP备17032973号-1