TWIST-LOCK PHOTOELECTRIC SWITCH

The photocontroller JL-202 series is applicable to control the street lighting, garden lighting, passage lighting and doorway lighting automatically in accordance with the ambient natural lighting lev
Category : Photo Controller
*JL-101A **09 ***/ L N 
*: Model Number;
**: Lead Length (in inches);
***: Other Options:
L = Couple metal lock-nuts (Null = One metal lock-nut offered);
N = Neoprene O-ring gasket for outdoor use. (Null = One gasket offered)
image/EeMkqFXxRx6QrEjTbMMWLQ
Product Summary

The photocontroller JL-202 series is applicable to control the street lighting, garden lighting, passage lighting and doorway lighting automatically in accordance with the ambient natural lighting level.

This product is designed on the basis of thermal - bimetallic structure that provides time delay over 30 seconds to avoid mis-operation due to spotlight or lightning during the night time. A temperature compensation system provides consistent performance regardless to the ambient temperature.

This product provides three twist-lock terminals meeting the requirements of ANSI C136.10-1996 and the Standard for Plug-In, Locking Type Photocontrols for Use with Area 


Technical Data
Model No. JL-101A JL-101B
Rated Voltage 120VAC 220-240VAC
Rated Frequency 50/60Hz
Rated Loading

600W TUNGSTEN

480VA BALLAST

Power consumption 1.5W max.
Operate Level

10~20Lx Turn-On

60-80Lx Turn-Off

Ambient Temperature -20℃ ~ +70℃
Related Humidity 95%RH
Lock Nut Brass made, ID 10mm
Lead WIre AWG#20
Overall Dimensions 34(L) x 12.5(W) x 20(H)mm, Nipple Height 16mm
Leads Length 6” or Customer request (AWG#20)
Weight Approx. 12.5grs(7” )

Installation & Operational Instructions

Disconnect power, remove junction box cover, place the SWITCH in knockout hole and fasten with locknut.

Wire according to the diagram in right hand.

Do not install the switch with the Photocell facing artificial or reflected light. This will cause the unit to cycle on and off at night.

Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes./p>


Installation

Disconnect power; wire the color coded receptacle according to the diagram below. 

Push the photocontroller on and twist it clockwise to lock it into the receptacle.  

Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller.  

Adjust the receptacle position if necessary.


Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes.


Tel:+86-591-87533017, 88000103,
88000107, 88000113, 88000115

3/F NO. 91 Taiyu Rd, Fuwan Pian,
Jinshan Industrial zone, Fuzhou,PRC 350008

Follow us

Copyright © Bonle (Fuzhou) International Co., Ltd.  All Rights Reserved  Powered by www.300.cn  闽ICP备17032973号-1