/
/
/
INTELLIGENT SEEK TO TYPE PHOTOELECTRIC SWITCH

INTELLIGENT SEEK TO TYPE PHOTOELECTRIC SWITCH

The photoelectric switch JL-423C is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
Category : Photo Controller
*JL-423C **M ***12 ****-CE
*:The Model Number
**:Surge protection version (option)
M=Surge protection version (option)
***:Wire length (in inches)
12=Wire length (in inches)
****:European color coded wires
CE=European color coded wires
image/rLwhLKSlTHinHRfo9ZfvBA
attribute:
Product Summary

The photoelectric switch JL-423C is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.

This product is designed with electronic circuits with MCU incorporated. Its quicker response with time delay of 5 seconds offers easy-to-test feature while avoiding mis-operation due to spotlight or lightening during night time. Especially, model JL-423C provides a wide voltage range for customer applications under almost power supplies.

Further, JL-423C-M provides surge protection feature up to 460J/10kA.


Technical Data
Model No. JL-423C/423CM
Rated Voltage 120-277VAC
Rated Frequency 50/60Hz
Rated Loading

1000W Tungsten

1200VA Ballast@120VAC

1800VA Ballast@208-277VAC

8A  e-Ballast@120VAC / 5A  e-Ballast@208~277V

Power consumption 0.4W max
Operate Level

16Lx   On

24Lx   Off

Ambient Temperature -30℃ ~ +70℃
IP Grade IP65
Overall Dimensions

JL-423C:  54.5(L) x 29(W) x 44(H)mm

JL-423CM:  54.5(L) x 29(W) x 50(H)mm

Leads Length 180mm or Customer request (AWG#16)
Fail Mode Fail-On
Sensor Type IR-Filtered Phototransistor
Midnight Schedule Available per client’s request

Installation

Disconnect power, remove junction box cover, place the SWITCH in knockout hole and fasten with locknut. 

Wire according to the diagram in right hand.

Do not install the switch with the Photocell facing artificial or reflected light. This will cause the unit to cycle on and off at night. 


Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes.

这是描述信息

Tel:+86-591-87533017, 88000103,
88000107, 88000113, 88000115

这是描述信息

3/F NO. 91 Taiyu Rd, Fuwan Pian,
Jinshan Industrial zone, Fuzhou,PRC 350008

这是描述信息

sales3@bonle.com; sales5@bonle.com
sales6@bonle.com; sales8@bonle.com
sales88@bonle.com

Company

Products

Service

Follow us

Copyright© 百纳(福州)进出口有限公司 All Rights Reserved 闽ICP备17032973号-1