/
/
/
WIDE VOLTAGE ELECTRONIC COIN-TYPE PHOTOELECTRIC SWITCH

WIDE VOLTAGE ELECTRONIC COIN-TYPE PHOTOELECTRIC SWITCH

The photoelectric switch JL-403 is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
Category : Photo Controller

*JL-403C **07 ***L ****M *****N

*:The Model Number
**:Lead Length
***:2nd Lock-Nut needed
L=2nd Lock-Nut needed
****:cULus Holographic Label applied
M=cULus Holographic Label applied
*****:Flat Gasket 
N=Flat Gasket
 
image/rLwhLKSlTHinHRfo9ZfvBA
attribute:
Product Summary

The photoelectric switch JL-403 is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.

This product is designed with electronic circuits. Its quicker response with time delay of 3-10 seconds offers easy-to-test feature. Especially, model JL-403C provides a wide voltage range for customer applications under almost power supplies. 

Further, a preset 3-10 seconds time-delay might avoid mis-operation due to spotlight or lightning during the night time

This product has been listed by UL Inc and is comply with the Standard for Non-industrial Photoelectric Switches for Lighting Control UL773A.


Technical Data
Model No. JL-403C
Rated Voltage 120-277VAC
Rated Frequency 50/60Hz
Rated Loading

500W Tungsten, 850VA Ballast, 5A E-Ballast

Power consumption 2W
Operate Level

10~20Lx On

30~80Lx Off

Ambient Temperature -40℃ ~ +70℃
Related Humidity 99%RH
Overall Dimensions 54.5(L) x 29(W) x 44(H)mm
Leads Length 180mm or Customer request (AWG#18)

Installation

Disconnect power; wire the color coded receptacle according to the diagram below. 

Push the photocontroller on and twist it clockwise to lock it into the receptacle. 

Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller. 

Adjust the receptacle position if necessary.


Initial Testing

It is normal for the SWITCH to take several minutes to turn off when first installed.

To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.

Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.

Test will take approximately 2 minutes.

这是描述信息

Tel:+86-591-87533017, 88000103,
88000107, 88000113, 88000115

这是描述信息

3/F NO. 91 Taiyu Rd, Fuwan Pian,
Jinshan Industrial zone, Fuzhou,PRC 350008

这是描述信息

sales3@bonle.com; sales5@bonle.com
sales6@bonle.com; sales8@bonle.com
sales88@bonle.com

Company

Products

Service

Follow us

Copyright© 百纳(福州)进出口有限公司 All Rights Reserved 闽ICP备17032973号-1